世祺 0423d5801c Initial commit (by Create-Cloudflare CLI) vor 1 Jahr
..
test 0423d5801c Initial commit (by Create-Cloudflare CLI) vor 1 Jahr
.travis.yml 0423d5801c Initial commit (by Create-Cloudflare CLI) vor 1 Jahr
BufferList.js 0423d5801c Initial commit (by Create-Cloudflare CLI) vor 1 Jahr
LICENSE.md 0423d5801c Initial commit (by Create-Cloudflare CLI) vor 1 Jahr
README.md 0423d5801c Initial commit (by Create-Cloudflare CLI) vor 1 Jahr
bl.js 0423d5801c Initial commit (by Create-Cloudflare CLI) vor 1 Jahr
package.json 0423d5801c Initial commit (by Create-Cloudflare CLI) vor 1 Jahr

README.md

bl (BufferList)

Build Status

A Node.js Buffer list collector, reader and streamer thingy.

NPM

bl is a storage object for collections of Node Buffers, exposing them with the main Buffer readable API. Also works as a duplex stream so you can collect buffers from a stream that emits them and emit buffers to a stream that consumes them!

The original buffers are kept intact and copies are only done as necessary. Any reads that require the use of a single original buffer will return a slice of that buffer only (which references the same memory as the original buffer). Reads that span buffers perform concatenation as required and return the results transparently.

const { BufferList } = require('bl')

const bl = new BufferList()
bl.append(Buffer.from('abcd'))
bl.append(Buffer.from('efg'))
bl.append('hi')                     // bl will also accept & convert Strings
bl.append(Buffer.from('j'))
bl.append(Buffer.from([ 0x3, 0x4 ]))

console.log(bl.length) // 12

console.log(bl.slice(0, 10).toString('ascii')) // 'abcdefghij'
console.log(bl.slice(3, 10).toString('ascii')) // 'defghij'
console.log(bl.slice(3, 6).toString('ascii'))  // 'def'
console.log(bl.slice(3, 8).toString('ascii'))  // 'defgh'
console.log(bl.slice(5, 10).toString('ascii')) // 'fghij'

console.log(bl.indexOf('def')) // 3
console.log(bl.indexOf('asdf')) // -1

// or just use toString!
console.log(bl.toString())               // 'abcdefghij\u0003\u0004'
console.log(bl.toString('ascii', 3, 8))  // 'defgh'
console.log(bl.toString('ascii', 5, 10)) // 'fghij'

// other standard Buffer readables
console.log(bl.readUInt16BE(10)) // 0x0304
console.log(bl.readUInt16LE(10)) // 0x0403

Give it a callback in the constructor and use it just like concat-stream:

const { BufferListStream } = require('bl')
const fs = require('fs')

fs.createReadStream('README.md')
  .pipe(BufferListStream((err, data) => { // note 'new' isn't strictly required
    // `data` is a complete Buffer object containing the full data
    console.log(data.toString())
  }))

Note that when you use the callback method like this, the resulting data parameter is a concatenation of all Buffer objects in the list. If you want to avoid the overhead of this concatenation (in cases of extreme performance consciousness), then avoid the callback method and just listen to 'end' instead, like a standard Stream.

Or to fetch a URL using hyperquest (should work with request and even plain Node http too!):

const hyperquest = require('hyperquest')
const { BufferListStream } = require('bl')

const url = 'https://raw.github.com/rvagg/bl/master/README.md'

hyperquest(url).pipe(BufferListStream((err, data) => {
  console.log(data.toString())
}))

Or, use it as a readable stream to recompose a list of Buffers to an output source:

const { BufferListStream } = require('bl')
const fs = require('fs')

var bl = new BufferListStream()
bl.append(Buffer.from('abcd'))
bl.append(Buffer.from('efg'))
bl.append(Buffer.from('hi'))
bl.append(Buffer.from('j'))

bl.pipe(fs.createWriteStream('gibberish.txt'))

API


new BufferList([ Buffer | Buffer array | BufferList | BufferList array | String ])

No arguments are required for the constructor, but you can initialise the list by passing in a single Buffer object or an array of Buffer objects.

new is not strictly required, if you don't instantiate a new object, it will be done automatically for you so you can create a new instance simply with:

const { BufferList } = require('bl')
const bl = BufferList()

// equivalent to:

const { BufferList } = require('bl')
const bl = new BufferList()

BufferList.isBufferList(obj)

Determines if the passed object is a BufferList. It will return true if the passed object is an instance of BufferList or BufferListStream and false otherwise.

N.B. this won't return true for BufferList or BufferListStream instances created by versions of this library before this static method was added.


bl.length

Get the length of the list in bytes. This is the sum of the lengths of all of the buffers contained in the list, minus any initial offset for a semi-consumed buffer at the beginning. Should accurately represent the total number of bytes that can be read from the list.


bl.append(Buffer | Buffer array | BufferList | BufferList array | String)

append(buffer) adds an additional buffer or BufferList to the internal list. this is returned so it can be chained.


bl.get(index)

get() will return the byte at the specified index.


bl.indexOf(value[, byteOffset][, encoding])

get() will return the byte at the specified index. indexOf() method returns the first index at which a given element can be found in the BufferList, or -1 if it is not present.


bl.slice([ start, [ end ] ])

slice() returns a new Buffer object containing the bytes within the range specified. Both start and end are optional and will default to the beginning and end of the list respectively.

If the requested range spans a single internal buffer then a slice of that buffer will be returned which shares the original memory range of that Buffer. If the range spans multiple buffers then copy operations will likely occur to give you a uniform Buffer.


bl.shallowSlice([ start, [ end ] ])

shallowSlice() returns a new BufferList object containing the bytes within the range specified. Both start and end are optional and will default to the beginning and end of the list respectively.

No copies will be performed. All buffers in the result share memory with the original list.


bl.copy(dest, [ destStart, [ srcStart [, srcEnd ] ] ])

copy() copies the content of the list in the dest buffer, starting from destStart and containing the bytes within the range specified with srcStart to srcEnd. destStart, start and end are optional and will default to the beginning of the dest buffer, and the beginning and end of the list respectively.


bl.duplicate()

duplicate() performs a shallow-copy of the list. The internal Buffers remains the same, so if you change the underlying Buffers, the change will be reflected in both the original and the duplicate. This method is needed if you want to call consume() or pipe() and still keep the original list.Example:

var bl = new BufferListStream()

bl.append('hello')
bl.append(' world')
bl.append('\n')

bl.duplicate().pipe(process.stdout, { end: false })

console.log(bl.toString())

bl.consume(bytes)

consume() will shift bytes off the start of the list. The number of bytes consumed don't need to line up with the sizes of the internal Buffers—initial offsets will be calculated accordingly in order to give you a consistent view of the data.


bl.toString([encoding, [ start, [ end ]]])

toString() will return a string representation of the buffer. The optional start and end arguments are passed on to slice(), while the encoding is passed on to toString() of the resulting Buffer. See the Buffer#toString() documentation for more information.


bl.readDoubleBE(), bl.readDoubleLE(), bl.readFloatBE(), bl.readFloatLE(), bl.readInt32BE(), bl.readInt32LE(), bl.readUInt32BE(), bl.readUInt32LE(), bl.readInt16BE(), bl.readInt16LE(), bl.readUInt16BE(), bl.readUInt16LE(), bl.readInt8(), bl.readUInt8()

All of the standard byte-reading methods of the Buffer interface are implemented and will operate across internal Buffer boundaries transparently.

See the Buffer documentation for how these work.


new BufferListStream([ callback | Buffer | Buffer array | BufferList | BufferList array | String ])

BufferListStream is a Node Duplex Stream, so it can be read from and written to like a standard Node stream. You can also pipe() to and from a BufferListStream instance.

The constructor takes an optional callback, if supplied, the callback will be called with an error argument followed by a reference to the bl instance, when bl.end() is called (i.e. from a piped stream). This is a convenient method of collecting the entire contents of a stream, particularly when the stream is chunky, such as a network stream.

Normally, no arguments are required for the constructor, but you can initialise the list by passing in a single Buffer object or an array of Buffer object.

new is not strictly required, if you don't instantiate a new object, it will be done automatically for you so you can create a new instance simply with:

const { BufferListStream } = require('bl')
const bl = BufferListStream()

// equivalent to:

const { BufferListStream } = require('bl')
const bl = new BufferListStream()

N.B. For backwards compatibility reasons, BufferListStream is the default export when you require('bl'):

const { BufferListStream } = require('bl')
// equivalent to:
const BufferListStream = require('bl')

Contributors

bl is brought to you by the following hackers:

License & copyright

Copyright (c) 2013-2019 bl contributors (listed above).

bl is licensed under the MIT license. All rights not explicitly granted in the MIT license are reserved. See the included LICENSE.md file for more details.