!LOADING PHASE
.XSTEP_1
Beginning of IGES file memory loading.
!
.XSTEP_2
IGES file opening error.
!
.XSTEP_3
Reason : No such file or directory.
!
.XSTEP_4
Reason : Not enough space.
!
.XSTEP_5
Reason : Permission denied.
!
.XSTEP_6
Reason : Too many open files.
!
.XSTEP_7
Reason : No determined.
!
.XSTEP_8
End of loading IGES file to memory (Elapsed time : %s).

!
.XSTEP_9
Beginning of IGES file reading.
!
.XSTEP_10
End of IGES file reading.
!
.XSTEP_11
Internal error during file header reading. Process continues.
!
.XSTEP_12
Header and content of IGES file are loaded.
!
.XSTEP_13
Internal error during reading of entity %d.
!
.XSTEP_14
Internal error during reading of entity %d (parameter %d).
!
.XSTEP_15
Total number of loaded entities %d.
!
.XSTEP_16
Beginning of model loading.
!
.XSTEP_17
End of model loading.
!
.XSTEP_18
Syntax error in IGES file at line %d in section %s.
!
.XSTEP_19
Syntax error in IGES file at line %d in section %s (line number may be incorrect).
!
.XSTEP_20
There is no Terminate Section, please check end of IGES file. Process continues.
!
.XSTEP_21
Number of ignored Null Entities : %d.
!
.XSTEP_22
 Unknown entity %s.
!
.XSTEP_23
 Recovered entity %s.
!
.XSTEP_24
Report : %d unknown entities.
!
.XSTEP_25
Number of fails in memory loading : %d.
!
.XSTEP_26
Number of warnings in memory loading : %d.
!
.XSTEP_27
 Directory Entry : there is no parameter. Process continues.
!
.XSTEP_28
 Directory Entry : parameter 1 (entity type) is incorrect.
!
.XSTEP_29
 Directory Entry : Field 4 (Line Font Pattern) is incorrect (Non null pointer or Integer between 0 and 5 was expected).
!
.XSTEP_30
 Directory Entry : Field 5 (Level) isincorrect (Not null pointer or not null Integer was expected).
!
.XSTEP_31
 Directory Entry : Field 6 (View) is incorrect (Not null pointer or Integer Zero was expected).
!
.XSTEP_32
 Directory Entry : Field 7 (Transformation Matrix) is incorrect (Not null pointer or Integer Zero was expected).
!
.XSTEP_33
 Directory Entry : Field 8 (Label Display Associativity) is incorrect (Not null pointer or Integer Zero was expected).
!
.XSTEP_34
 Directory Entry : Field 13 (Color Number) is incorrect (Not null pointer or Integer between 0 and 8 was expected).
!
.XSTEP_35
 Null entity %s.
!
.XSTEP_36
 Unknown entity %s.
!
.XSTEP_37
 Associativity list is incorrect.
!
.XSTEP_38
 Property list is incorrect.
! ANALYSIS PHASE
.XSTEP_39
Global Section : Incorrect number of parameters (%d or %d parameters were expected).
!
.XSTEP_40
Global Section (Parameters 1 and 2) : Parameter Delimiter Character and Record Delimiter Character must not have the same value.
!
.XSTEP_41
Global Section (Parameter 2) : Parameter Delimiter Character is incorrect. Default character comma taken.
!
.XSTEP_42
Global Section (Parameter 2) : Character Record Delimiter parameter is incorrect. Default character Semicolon taken.
!
.XSTEP_43
Global Section (Parameter 8) : Single Precision Magnitude parameter is incorrect (Expected positive Integer). Default value 38 taken.
!
.XSTEP_44
Global Section (Parameter 9) : Single Precision Significance parameter is incorrect (Expected positive Integer). Default value 6 taken.
!
.XSTEP_45
Global Section (Parameter 10) : Double Precision Magnitude parameter is incorrect (Expected positive Integer). Default value 308 taken.
!
.XSTEP_46
Global Section (Parameter 11) : Double Precision Significance parameter is incorrect (Expected positive Integer). Default value 15 taken.
!
.XSTEP_47
Global Section (Parameter 13) : Model Space Scale parameter is incorrect (Expected positive Real). Default value 1.0 taken.
!
.XSTEP_48
Global Section (Parameter 14) : Unit Flag parameter is incorrect  (Integer between 1 et 11 was expected). Default value 2 taken : Millimeters.
!
.XSTEP_49
Global Section (Parameter 15): Unit Name parameter is not recognized. Default value 2 taken : Millimeters.srl
!
.XSTEP_50
Global Section (Parameter 15) : Unit Name parameter is undefined : Unit Name ignored.
!
.XSTEP_51
Global Section (Parameter 14 and 15) : Unit Flag parameter does not correspond to Unit Name parameter : Unit Name ignored.
!
.XSTEP_52
Global Section (Parameter 19) :   (Expected positive Real). Default value 0.0 taken.
!
.XSTEP_53
Global Section (Parameter 23) : Version Flag parameter is incorrect (Integer between 1 et 11 was expected. Default value 3 taken : Version 2.0.
!
.XSTEP_54
Global Section (Parameter 24) : Drafting Standard Flag parameter is incorrect (Integer between 0 et 7). Default value 3 taken : No standard.Global Section (Parameter 25) : Last change Date parameter was undefined.
!
.XSTEP_55
Global Section (Parameter 25) : Last Change Date parameter is undefined.
!
.XSTEP_56
Global Section (Parameter %d) : Date parameter is undefined.
!
.XSTEP_57
Global Section (Parameter %d) : Incorrect Date Format.
!
.XSTEP_58
 Directory Entry (Field 1) : entity type number field is incorrect (Expected Integer : %d).
!
.XSTEP_59
 Directory Entry (Field 3) : Structure field is undefined.
!
.XSTEP_60
 Directory Entry (Field 4) : Line Font Pattern field is incorrect (Pointer or Integer between 0 and 5 was expected). Default value 0 taken.
!
.XSTEP_61
 Directory Entry (Field 5) : Level field is incorrect (Pointer or Integer were expected). Default value 0 taken.
!
.XSTEP_62
 Directory Entry (Field 6) : View field is incorrect (Pointer or Zero were expected). Default value 0 taken.
!
.XSTEP_63
 Directory Entry (Field 7): Transformation Matrix field is incorrect (Pointer or Zero were expected). Default value 0 taken.
!
.XSTEP_64
 Directory Entry (Field 8): Label Display entity  field is incorrect (Pointer or Zero were expected). Default value 0 taken.
!
.XSTEP_65
 Directory Entry (Field 9) : Blank Status field is incorrect (Expected Integer : 0 or 1). 
!
.XSTEP_66
 Directory Entry (Field 9) : Subordinate entity Switch field is incorrect (Integer between 0 and 3 was expected). 
!
.XSTEP_67
 Directory Entry (Field 9) : entity Use Flag is incorrect  (Integer between 0 and 6 was expected). 
!
.XSTEP_68
 Directory Entry (Field 9) : Hierarchy field is incorrect (Integer between 0 and 2 was expected). 
!
.XSTEP_69
 Directory Entry (Field 12) : Line Weight Number is undefined.
!
.XSTEP_70
 Directory Entry (Field 13) : Color Number field is incorrect (Pointer or Integer between 0 and 8 was expected).
!
.XSTEP_71
 Directory Entry (Field 15) : Form Number field is incorrect.
!
.XSTEP_72
 Directory Entry (Field 19): entity Subscript Number field is incorrect (Integer was expected).
!Type 116
.XSTEP_73
Parameter Data  : parameter %d (Coordinate of Point) is incorrect (Real was expected).
!Type 116
.XSTEP_74
Parameter Data  : parameter %d (Display Symbol) is incorrect (Subfigure Definition entity, Type 308 was expected).
!Type 100
.XSTEP_75
Parameter Data  : parameter 1 (ZT displacement of Arc) is incorrect (Real was expected).
!Type 100
.XSTEP_76
Parameter Data  : parameter %d (Arc Center) is incorrect (Real was expected).
!Type 100
.XSTEP_77
Parameter Data  : parameter %d (Start Point) is incorrect (Real was expected).
!Type 100
.XSTEP_78
Parameter Data  : parameter %d (Terminate Point) is incorrect (Real was expected).
!Type 102
.XSTEP_79
Parameter Data : parameter 1 (Number of Entities) is incorrect : %d (Expected positive Integer).
!Type 102
.XSTEP_80
Parameter Data : Some pointers in entity list are null or negative : ignored (Point, Connect Point or Parameterized Curve Entities were expected).
!Type 104
.XSTEP_81
Parameter Data : parameter %d (Conic Coefficient)  is incorrect (Real was expected).
!Type 104
.XSTEP_82
Parameter Data : parameter 7 (Coordinate of Plane) is incorrect (Real was expected).
!Type 104
.XSTEP_83
Parameter Data : parameter %d (Starting Point) is incorrect (Real was expected).
!Type 104
.XSTEP_84
Parameter Data : parameter %d (Terminate Point) is incorrect (Real was expected).
!Type 106
.XSTEP_85
Parameter Data : parameter 1 (Interpretation Flag) is incorrect (Expected Integer : %d).
!Type 106
.XSTEP_86
Parameter Data : parameter 2 (Number of n-tuples) is incorrect (Expected positive Integer).
!Type 106
.XSTEP_87
Parameter Data : parameter 3 (Common Z Displacement) is incorrect (Real was expected).
!Type 106
.XSTEP_88
Parameter Data : not all Data Point parameters are of Real type.
!Type 110
.XSTEP_89
Parameter Data  : parameter %d (Starting Point) is incorrect (Real was expected).
!Type 110
.XSTEP_90
Parameter Data  : parameter %d (Terminate Point) is incorrect (Real was expected).
!Type 112
.XSTEP_91
Parameter Data : parameter 1 (Spline Type) is incorrect (Integer between 1 and 6 was expected).
!Type 112
.XSTEP_92
Parameter Data (Parameter 2) : parameter 2 (Degree of Continuity) is incorrect (Expected Integer).
!Type 112
.XSTEP_93
Parameter Data : parameter 3 (Number of Dimensions) is incorrect (Expected Integer : 2 or 3).
!Type 112
.XSTEP_94
Parameter Data : parameter 4 (Number of Segments) is incorrect (Expected positive Integer).
!Type 112
.XSTEP_95
Parameter Data : not all Break Point parameters are of Real type.
!Type 112
.XSTEP_96
Parameter Data : entity is planar but parameters BZ, CZ. DZ are not null.
!Type 126
.XSTEP_97
Parameter Data : parameter %d (Upper Index of Sum) is incorrect (Expected positive Integer).
!Type 126
.XSTEP_98
Parameter Data : parameter %d (Degree of Basis Functions) is incorrect (Expected Integer) : Default value 0 taken.
!Type 126
.XSTEP_99
Parameter Data : parameter %d (Planar/Non Planar Flag) is incorrect (Expected Boolean).
!Type 126
.XSTEP_100
Parameter Data : parameter %d (Open/Closed Flag) is incorrect (Expected Boolean).
!Type 126
.XSTEP_101
Parameter Data : parameter %d (Rational/Polynomial Flag) is incorrect (Expected Boolean).
!Type 126
.XSTEP_102
Parameter Data : parameter %d (NonPeriodic/Periodic Flag) is incorrect (Expected Boolean).
!Type 126
.XSTEP_103
Parameter Data : not all Knot Sequence parameters are of Real type.
!Type 126
.XSTEP_104
Parameter Data : not all Weight parameters are of positive Real type.
!Type 126
.XSTEP_105
Parameter Data  : parameter %d (Control Point) is incorrect (Real was expected).
!Type 126
.XSTEP_106
Parameter Data : parameter %d (Starting Value) is incorrect (Real was expected).
!Type 126
.XSTEP_107
Parameter Data : parameter %d (Ending Value) is incorrect (Real was expected).
!Type 126
.XSTEP_108
Parameter Data : parameter %d (Unit Normal) is incorrect (Real was expected).
!Type 126
.XSTEP_109
Parameter Data : parameter %d (Unit Normal) is undefined for a planar curve.
!Type 130
.XSTEP_110
Parameter Data : parameter 1 (Curve entity to be offset) is incorrect (Curve entity was expected).
!Type 130
.XSTEP_111
Parameter Data : parameter 2 (Offset Distance Flag) is incorrect (Integer between 1 and 3 was expected).
!Type 130
.XSTEP_112
Parameter Data : parameter 3 (Curve entity whose coordinate describes offset) is incorrect (Curve entity was expected).
!Type 130
.XSTEP_113
Parameter Data : parameter 4 (Particular Coordinate) is incorrect (Expected Integer).
!Type 130
.XSTEP_114
Parameter Data : parameter 5 (Tapered Offset Type Flag) is incorrect (Expected Integer).
!Type 130
.XSTEP_115
Parameter Data : parameter 6 (First Offset distance) is incorrect (Real was expected).
!Type 130
.XSTEP_116
Parameter Data : parameter 7 (Arc Length of First Offset Distance) is incorrect (Real was expected).
!Type 130
.XSTEP_117
Parameter Data : parameter 8 (Second Offset Distance) is incorrect (Real was expected).
!Type 130
.XSTEP_118
Parameter Data : parameter 9 (Arc Length of Second Offset Distance) is incorrect (Real was expected).
!Type 130
.XSTEP_119
Parameter Data : parameter 13 (Offset Curve Starting Parameter Value) is incorrect (Real was expected).
!Type 130
.XSTEP_120
Parameter Data : parameter 14 (Offset Curve Ending Parameter Value) is incorrect (Real was expected).
!Type 130
.XSTEP_121
Parameter Data  : parameter %d (Unit Vector Normal to plane) is incorrect (Real was expected).
!Type 141
.XSTEP_122
Parameter Data : parameter 1 (Type of Bounded Surface Representation) is incorrect (Expected Integer : 0 or 1).
!Type 141
.XSTEP_123
Parameter Data : parameter 2 (Trimming Curves Representation) is incorrect (Integer between 0 and 3 was expected).
!Type 141
.XSTEP_124
Parameter Data : parameter 3 (Untrimmed Surface) is incorrect (Untrimmed Surface entity was expected).
!Type 141
.XSTEP_125
Parameter Data : Not parametric Surface %d (parameter 3).
!Type 141
.XSTEP_126
Parameter Data :  parameter 4 (Number of Curves) is incorrect (Expected positive).
!Type 141
.XSTEP_127
Parameter Data : parameter 5 (Model Space Curve) is incorrect (Curve entity was expected).
!Type 141
.XSTEP_128
Parameter Data (Parameter 6) : Orientation Flag parameter is incorrect (Expected Integer : 1 or 2).
!Type 141
.XSTEP_129
Parameter Data : parameter 7 (Number of Associated Parameter Space Curves) is incorrect (Expected Integer : 0).
!Type 141
.XSTEP_130
Parameter Data : Some pointers in Parameter Space Curve list are null or negative : ignored (Curve Entities were expected).
!Type 142
.XSTEP_131
Parameter Data : parameter 2 (Surface on which the curve lies) is incorrect (Surface entity was expected).
!Type 142
.XSTEP_132
Parameter Data : parameter 3 (Curve 2D) is incorrect (Curve entity was expected).
!Type 142
.XSTEP_133
Parameter Data : parameter 4 (Curve 3D) is incorrect (Curve entity was expected).
!Type 142
.XSTEP_134
Parameter Data : pointers of Curve 2D and 3D are null (parameter 3 and 4) (Curve Entities were expected).
!Type 108
.XSTEP_135
Parameter Data : parameter %d (Coefficient Of Plane) is incorrect (Real was expected).
!Type 108
.XSTEP_136
Parameter Data : parameter 5 (Closed Curve) is incorrect (Curve entity was expected).
!Type 108
.XSTEP_137
Parameter Data  : parameter 5 (Null pointer in Form Number 0 was Expected).
!Type 108
.XSTEP_138
Parameter Data : parameter 9 (Display Symbol Size) is incorrect (Real was expected).
!Type 108
.XSTEP_139
Parameter Data  : parameter %d (Coordinate of Display Symbol) is incorrect (Real was expected).
!Type 114
.XSTEP_140
Parameter Data : parameter 1 (Spline Boundary Type) is incorrect  (Integer between 1 and 6 was expected).
!Type 114
.XSTEP_141
Parameter Data : parameter 3 (Number of U Segments) is incorrect (Expected positive Integer).
!Type 114
.XSTEP_142
Parameter Data : parameter 4 (Number of V Segments) is incorrect (Expected positive Integer).
!Type 114
.XSTEP_143
Parameter Data : not all Breakpoints in U parameters are of Real type.
!Type 114
.XSTEP_144
Parameter Data : not all Breakpoints in V parameters are of Real type.
!Type 114
.XSTEP_145
Parameter Data : not all %s Coefficient of Patch parameter(s) are of Real type.
!Type 114
.XSTEP_146
Parameter Data : parameter %d (Last Z Coefficient of Patch) is  incorrect.
!Type 114
.XSTEP_147
Parameter Data : %s Coefficient of Patch parameters are incorrect (Expected Integer : 16).
!Type 118
.XSTEP_148
Parameter Data : parameter 1 (First Curve) is incorrect.
!Type 118
.XSTEP_149
EParameter Data : parameter 2 (Second Curve) is incorrect.
!Type 118
.XSTEP_150
Parameter Data : parameter 3 (Direction Flag) is incorrect (Integer 0 or 1 was expected).
!Type 118
.XSTEP_151
Parameter Data : parameter 4 (Developable Surface Flag) is incorrect (Integer 0 or 1 was expected).
!Type 120
.XSTEP_152
Parameter Data : parameter 1 (Axis of Revolution) is incorrect.
!Type 120
.XSTEP_153
Parameter Data : parameter 2 (Generatrix entity) is incorrect.
!Type 120
.XSTEP_154
Parameter Data : parameter 3 (Start Angle) is incorrect.
!Type 120
.XSTEP_155
Parameter Data : parameter 4 (Terminate Angle) is incorrect.
!Type 122
.XSTEP_156
Parameter Data : parameter 1 (Generatrix entity) is incorrect.
!Type 122
.XSTEP_157
Parameter Data  : parameter %d (Coordinate of Terminate Point) is incorrect.
!Type 128
.XSTEP_158
Parameter Data : Incorrect Additional value.
!Type 128
.XSTEP_159
Parameter Data : Additional Real value :  ignored.
!Type 128
.XSTEP_160
Parameter Data : Invalid Number in First Knots sequence.
!Type 128
.XSTEP_161
Parameter Data : Invalid Number in Second Knots sequence.
!Type 140
.XSTEP_162
Parameter Data  : parameter %d (Coordinate of Offset Indicator) is incorrect.
!Type 140
.XSTEP_163
Parameter Data : parameter 4 (Offset Distance) is incorrect.
!Type 140
.XSTEP_164
Parameter Data : parameter 5 (Surface entity to be offset) is incorrect.
!Type 143
.XSTEP_165
Parameter Data : parameter 1 (Bounded Surface Representation type) is incorrect (Integer 0 or 1 was expected).
!Type 143
.XSTEP_166
Parameter Data : parameter 2 (Surface entity to be bounded) is incorrect.
!Type 143
.XSTEP_167
Parameter Data : parameter 3 (Number of Boundary entities) is incorrect.
!Type 143
.XSTEP_168
Parameter Data : parameter %d (Boundary entity)  is incorrect.
!Type 144
.XSTEP_169
Parameter Data : parameter 1 (Surface to be trimmed)  is incorrect.
!Type 144
.XSTEP_170
Parameter Data : parameter 2 (Outer Boundary type) is incorrect (Integer 0 or 1 was expected).
!Type 144
.XSTEP_171
Parameter Data : parameter 3 (Number of Inner Boundary Closed Curves) is incorrect (Expected positive Integer).
!Type 144
.XSTEP_172
Parameter Data : parameter 4 (Outer Boundary)  is incorrect (Curve on a Parametric Surface entity, Type 142 was expected).
!Type 144
.XSTEP_173
Parameter Data : parameter %d (Inner Boundary) is incorrect (Curve on a Parametric Surface entity, Type 142 was expected).
!Type 190
.XSTEP_174
Parameter Data : parameter 1 (Point on Surface) is incorrect (Point entity, Type 116 was expected).
!Type 190
.XSTEP_175
Parameter Data : parameter 2 ( Surface Normal Direction) is incorrect (Direction entity was expected).
!Type 190
.XSTEP_176
Parameter Data : parameter 3  (Reference Direction) is incorrect (Direction entity was expected).
!Type 190
.XSTEP_177
Parameter Data : parameter 3 (Null pointer was expected when Form Number field is 1).
!Type 186
.XSTEP_178
Parameter Data : parameter 1 (Shell) is incorrect (Closed Shell entity, Type 514, Form 1 was expected).
!Type 186
.XSTEP_179
Parameter Data : parameter %d (Void Shell) is incorrect (Closed Shell entity, Type 514, Form 1 was expected).
!Type 186
.XSTEP_180
Parameter Data : parameter %d (Orientation Flag) is incorrect (Expected Boolean).
!Type 186
.XSTEP_181
Parameter Data : parameter 3 (Number of Void Shells) is incorrect (Expected positive Integer)
!Type 502
.XSTEP_182
Parameter Data : parameter 1 (Number of Vertex Tuples) is incorrect (Expected positive Integer).
!Type 502
.XSTEP_183
Parameter Data  : parameter %d (Coordinate of Vertex) is incorrect (Real was expected).
!Type 504
.XSTEP_184
Parameter Data : parameter 1 (Number of Edge Tuples) is incorrect (Expected positive Integer).
!Type 504
.XSTEP_185
Parameter Data : parameter 2 (Model Space Curve) is incorrect (Curve entity was expected).
!Type 504
.XSTEP_186
Parameter Data : parameter %d (Start Vertex Index) is incorrect (Expected Integer).
!Type 504
.XSTEP_187
Parameter Data : parameter %d (Terminate Vertex Index) is incorrect (Expected Integer).
!Type 504
.XSTEP_188
 Parameter Data : parameter %d (Start Vertex List entity) is incorrect (Vertex List entity, Type 502 was expected).
!Type 504
.XSTEP_189
 Parameter Data : parameter %d (Terminate Vertex List entity) is incorrect (Vertex List entity, Type 502 was expected).
!Type 508
.XSTEP_190
Parameter Da ta : parameter %d (Edge Type) is incorrect (Integer 0 or 1 was expected).
!Type 508
.XSTEP_191
Parameter Data : parameter %d (List Index) is incorrect (Expected Integer).
!Type 508
.XSTEP_192
Parameter Data : parameter %d (Number of Parameter Curves) is incorrect (Expected positive Integer).
!Type 508
.XSTEP_193
Parameter Data : parameter %d (Vertex or Edge List entity) is incorrect (Vertex List  or Edge List entity, Type 502 or 504 was expected).
!Type 508
.XSTEP_194
Parameter Data : parameter %d (Parameter Space Curve) is incorrect (Curve entity was expected).
!Type 508
.XSTEP_195
Parameter Data : parameter %d (Isoparametric Flag) is incorrect (Expected Boolean).
!Type 510
.XSTEP_196
Parameter Data : parameter 1 (Surface) is incorrect.
!Type 510
.XSTEP_197
Parameter Data : parameter 2 (Number of Loops) is incorrect (Expected positive Integer).
!Type 510
.XSTEP_198
Parameter Data : parameter 3 (Outer Loop flag) is incorrect (Expected Boolean).
!Type 510
.XSTEP_199
Parameter Data : parameter %d (Loop of the Face) is incorrect (Loop entity, Type 508 was expected).
!Type 514
.XSTEP_200
Parameter Data : parameter 1 (Number of Faces) is incorrect (Expected positive Integer).
!Type 514
.XSTEP_201
Parameter Data : parameter 2 (Face) is incorrect (Face entity, Type 510 was expected).
!Type 402, Form 1 or 7
.XSTEP_202
Form %d : Parameter Data : parameter 1 (Number of Entries) is incorrect (expected positive integer).
!Type 402, Form 1 or 7
.XSTEP_203
Form %d : Parameter Data : some pointers of entity list are null or negative : ignored (Entities were expected).
!Type 402
.XSTEP_204
Form 9 : Parameter Data : parameter 1 (Number of Parent entity) is incorrect  (Expected Integer : 1).
!Type 402
.XSTEP_205
Form 9 : Parameter Data : parameter 2 (Number of Children) is incorrect  (expected positive integer).
!Type 402
.XSTEP_206
Form 9 : Parameter Data : parameter 3 (Parent entity) is incorrect (entity expected).
!Type 402
.XSTEP_207
Form 9 : Parameter Data : some pointers in Child Entity List are null or negative : ignored (Entities were expected).
!Type 308
.XSTEP_208
Parameter Data : parameter 1 (Depth of Subfigure) is incorrect  (Expected Integer).
!Type 308
.XSTEP_209
Parameter Data : parameter 2 (Subfigure Name) is incorrect : %s (Expected String in hollerith Form).
!Type 308
.XSTEP_210
Parameter Data : parameter 3 (Number of Entities) is incorrect  (Expected positive Integer).
!Type 308
.XSTEP_211
Parameter Data : Some pointers of Associated entity List are null or negative : ignored (Entities were expected).
!Type 408
.XSTEP_212
Parameter Data : parameter 1 (Subfigure definition entity) is incorrect (Subfigure definition entity, Type 308 expected).
!Type 408
.XSTEP_213
Parameter Data  : parameter %d (Translation data) is incorrect (Real was expected).
!Type 408
.XSTEP_214
Parameter Data  : parameter 5 (Scale Factor) is incorrect (Real was expected). Default value 1.0 taken.
!Type 124
.XSTEP_215
Parameter Data  : not all parameters are of Real type.
!
!ADDED MESSAGES
.XSTEP_246
 Parameter Data : parameter 4 (Number of segments) is less than 1.
!
!
! DCE 6/11/98 Add in Load phase
!
.XSTEP_276
Parameter Data : Parameter 1 (Curve creation mode) is invalid (integer expected).
!
.XSTEP_277
Parameter Data : Parameter 5 (Representation preference) is invalid (integer expected).
!
.XSTEP_278
Exception during loading entity %s
!
!
!
! ===================================================================
!
!
!
! New translation messages ( S3767 )
!
.IGES_1000
 Entity %s has not been loaded into memory
!
.IGES_1001
 Form %d : Not an implemented entity type : cannot transfer.
!
.IGES_1005
 Software error : impossible entity transfer.
!
!.IGES_1006 same as 1015
! exception raising during transfer.
!
.IGES_1010
 Resulting TopoDS_Shape has not same 2D and 3D parametrization.
!
.IGES_1015
 Software error : transfer interrupted !

.IGES_1020
 Parameter data : pointer %d in associated entity list is null or negative and ignored.
!
.IGES_1025
 Transfer error on IGES entity %d : entity skipped.
!
.IGES_1030
 Form %d: problems during translation some items in the group.
!
.IGES_1035
 Transformation matrix is invalid : not applied.
!
.IGES_1036
 Software error : entity skipped.
!
.IGES_1040
 Parameter data : pointer %d in entity list is null or has an invalid type and ignored.
!
.IGES_1045
 Two consecutives entities are identical (rank %d): only one is transferred.
!
.IGES_1050
 %dD curve of rank %d was reversed.
!
.IGES_1051
 All %dD curves before rank %d were reversed.
!
.IGES_1055
 %dD curves of rank %d were slightly disconnected : repaired.
!
.IGES_1060
 %dD curves of rank %d were too disconnected : entity skipped.
!
.IGES_1061
 Surface is translated to TopoDS_Shell : entity skipped.
!
.IGES_1062
 CurveOnSurface on Composite Surface case not implemented : 3D representation returned.
!
.IGES_1066
 Transfer error on surface where curve lies.
!
.IGES_1070
 Representations in file are inconsistent : recomputated from %dD.
!
.IGES_1090
 Curve was slightly self-intersecting : repaired.
!
.IGES_1095
 3D and 2D curve representations are invalid : entity skipped.
!
.IGES_1100
 Parameter data : value of parameter 2 (Offset Distance Flag) is not 1 : case not implemented.
!
.IGES_1105
 Ending parameter is beyond end of curve : entity skipped.
!
.IGES_1110
 Transfer error on basic curve : entity skipped.
!
.IGES_1115
 With C0 continuity can not be split into Geom_BSplineCurve C1 lower than Precision::Confusion().
!
.IGES_1120
 With C0 continuity was split into C1 continuity Geom_BSplineCurve.
!
.IGES_1125
 Parameter data : parameter 1 (Type of Bounded Surface Representation = 0) : case not implemented. 
!
.IGES_1130
 Boundary on Composite Surface : case not implemented.
!
.IGES_1135
 %dD curve representation is not defined : computed from %dD curve representation.
! 2D curve representation is not defined : computed from 3D curve representation.
!
.IGES_1140
 Error during 3D curve transfer : recomputed from 2D.
!
.IGES_1145
 Error during %dD curve transfer : recomputed from %dD.
! error during 2D curve transfer : recomputed from 3D.
!
.IGES_1150
 %s too disconnected :recomputed from %dD.
! 2D TopoDS_Wire too disconnected :recomputed from 3D.
!
.IGES_1155
 Parameter data : (parameter 1 to 6) coefficients do not satisfy a conic equation.
!
.IGES_1156
 %s %s transfer failed : entity skipped.
! (type IGES) (DE:Number) transfer failed : entity skipped.
!
.IGES_1160
 Parameter data (Parameters 8 to 11) : start and terminate coordinates of arc are the same : entity not trimmed.
!
.IGES_1165 
 Transformation is not planar : not applied.
!
.IGES_1170
 Polynomial equation is incorrect.
!
.IGES_1175
 Error during creation of control points.
!
.IGES_1180
 Parameter data : parameter 1 (Spline Type >3) : case not implemented.
!
.IGES_1190
 Parameter data : parameter 2 (Degree of basis functions) is lower than 0 or greater than max degree : transfer interrupted.
!
.IGES_1195
 Parameter data : incorrect number of control points (2 or more are required).
!
.IGES_1200
 %s multiplicity > degree %s (or degree %s + 1 at end) : corrected.
!
.IGES_1201
 %s multiplicity > degree %s (or degree %s + 1 at end) : corrected.
!
.IGES_1210
 Sum of %s multiplicities is not equal to sum (number of poles + %s degree +1).
!
.IGES_1215
 Parameter data : some weight parameters are not of positive real type : entity skipped.
!
.IGES_1220
 Rational BSpline %s is in fact polynomial.
!
.IGES_1221
 Surface is made periodic.
!
.IGES_1225
 Start and terminate points are the same.
!
! 1230 is the same as 1195
!
.IGES_1235
 Curve is too small to be transferred : entity skipped.
!
.IGES_1240
 Vector is not for this form : ignored. 
!
.IGES_1250
 Resulting Geom_Surface is C0-continuous.
!
.IGES_1255
 Ruling failed : entity skipped.
!
.IGES_1265
 Basis surface is not C0-continuous : offset surface construction impossible.
!
.IGES_1266
 Basis surface is C0-continuous and cannot be corrected to C1-continuous.
!
.IGES_1267
 Basis surface is C0-continuous but was corrected to C1-continuous.
!
.IGES_1270
 Basis surface is C0-continuous and is transferred into a TopoDS_Shell. Only first face was offsetted.
!
.IGES_1275
 Model Space Representation 0 case not implemented : result is a basis surface.
!
.IGES_1280
 Invalid direction : entity skipped.constituent
!
.IGES_1285
 Parameter data : pointer %d of child entity list is null or negative : skipped.
!
.IGES_1295
 Hole %d and plane are not coplanar.
!
.IGES_1300
 Bounding curve is invalid : plane is not trimmed.
!
.IGES_1305
 Parameter data : parameter 3 or 4 (number of segments) is less than one.
!
.IGES_1306
 Improper type for underlying curve number %d.
 
.IGES_1310
 Parameter data : parameter 3 or 4 (degree of basis function) is less than one or greater than maximum degree.
!
.IGES_1325
 Item %d of EdgeList cannot be represented by single edge (non-continuous or composite curve).
!
.IGES_1345
 Parameter data : parameter %d (parameter space curve) is incorrect.
!
.IGES_1360
 TopoDS_Shell is not closed.
!
.IGES_1365
 Incorrect edge number %d.
!
.IGES_1370
 Missing seam-edge was added
!
.IGES_1371
 TopoDS_Face was created with natural bounds
!
.IGES_1372
 One or more TopoDS_Wire(s) on TopoDS_Face was reversed
!
.IGES_1373
 Knots are not in ascending order
!
.IGES_1374
 Difference between weights is too big.
!
!
!
!
! Trace File messages 
.IGES_2000
Diagnostics for IGES file read : %s
!
.IGES_2005
Trace level : %d

!
.IGES_2010
Beginning of IGES file check.
!
.IGES_2015
Number of warnings in check : %d.
!
.IGES_2020
Number of fails in check : %d
!
.IGES_2025
End of file check(Elapsed time : %s).
!
.IGES_2030
Beginning of IGES data translation.
!
.IGES_2031
File has not been loaded.

!
.IGES_2032
IGES entity %d does not exist.

!
.IGES_2035
read.precision.mode : %d
!
.IGES_2040
read.precision.val : %f
!
.IGES_2045
read.iges.bspline.continuity : %d
!
.IGES_2050
read.surfacecurve.mode : %d

!
.IGES_2055
Number of warnings in transfer : %d.
!
.IGES_2060
Number of fails in transfer : %d
!
.IGES_2065
End of IGES data translation (Elapsed time : %s).
!
.IGES_2070
Translating IGES entity DE:%d Type:%d
!
.IGES_2075

%s produced.
!
.IGES_2076
No TopoDS_Shape produced.

!Messages for TPSTAT.
.IGES_3000
********************************************************************************
.IGES_3005
General statistics for transfer :
!
.IGES_3010
	Number of selected IGES entities  	: %d
!
.IGES_3011
	Number of roots IGES entities  		: %d
!
.IGES_3015
	Number of CasCade resulting Shapes 	: %d
!
.IGES_3020
	Number of warnings		 	: %d
!
.IGES_3025
	Number of fails 		 	: %d
!
.IGES_3030
Count	W/F	Type	Form	Message on IGES entity
-----	---	----	----	----------------------
!
.IGES_3035
On IGES entities (DE) :
!
.IGES_3040
Count of CasCade resulting shapes

!
.IGES_3045

Count	CasCade Shapes
-----	--------------
!
.IGES_3050
Mapping of all IGES entities
.IGES_3055

Type	Form	Count	CasCade Shapes
----	----	-----	--------------
!
! Debug messages
.IGES_10005
 Small edge removed
.IGES_10010
 Degenerated edge detected
.IGES_10015
 Lacking edge inserted
!
!
.IGES_10020
 Null area wire was detected, wire skipped.