curses — Terminal handling for character-cell displays

Source code: Lib/curses

---

The curses module provides an interface to the curses library, the de-facto standard for portable advanced terminal handling.

While curses is most widely used in the Unix environment, versions are available for Windows, DOS, and possibly other systems as well. This extension module is designed to match the API of ncurses, an open-source curses library hosted on Linux and the BSD variants of Unix.

Note

Whenever the documentation mentions a character it can be specified as an integer, a one-character Unicode string or a one-byte byte string.

Whenever the documentation mentions a character string it can be specified as a Unicode string or a byte string.

See also

Module curses.ascii

Utilities for working with ASCII characters, regardless of your locale settings.

Module curses.panel

A panel stack extension that adds depth to curses windows.

Module curses.textpad

Editable text widget for curses supporting Emacs-like bindings.

Curses Programming with Python

Tutorial material on using curses with Python, by Andrew Kuchling and Eric Raymond.

Functions

The module curses defines the following exception:

exception curses.error

Exception raised when a curses library function returns an error.

Note

Whenever x or y arguments to a function or a method are optional, they default to the current cursor location. Whenever attr is optional, it defaults to A_NORMAL.

The module curses defines the following functions:

curses.baudrate()

Return the output speed of the terminal in bits per second. On software terminal emulators it will have a fixed high value. Included for historical reasons; in former times, it was used to write output loops for time delays and occasionally to change interfaces depending on the line speed.

curses.beep()

Emit a short attention sound.

curses.can_change_color()

Return True or False, depending on whether the programmer can change the colors displayed by the terminal.

curses.cbreak()

Enter cbreak mode. In cbreak mode (sometimes called “rare” mode) normal tty line buffering is turned off and characters are available to be read one by one. However, unlike raw mode, special characters (interrupt, quit, suspend, and flow control) retain their effects on the tty driver and calling program. Calling first raw() then cbreak() leaves the terminal in cbreak mode.

curses.color_content(color_number)

Return the intensity of the red, green, and blue (RGB) components in the color color_number, which must be between 0 and COLORS - 1. Return a 3-tuple, containing the R,G,B values for the given color, which will be between 0 (no component) and 1000 (maximum amount of component).

curses.color_pair(pair_number)

Return the attribute value for displaying text in the specified color pair. Only the first 256 color pairs are supported. This attribute value can be combined with A_STANDOUT, A_REVERSE, and the other A_* attributes. pair_number() is the counterpart to this function.

curses.curs_set(visibility)

Set the cursor state. visibility can be set to 0, 1, or 2, for invisible, normal, or very visible. If the terminal supports the visibility requested, return the previous cursor state; otherwise raise an exception. On many terminals, the “visible” mode is an underline cursor and the “very visible” mode is a block cursor.

curses.def_prog_mode()

Save the current terminal mode as the “program” mode, the mode when the running program is using curses. (Its counterpart is the “shell” mode, for when the program is not in curses.) Subsequent calls to reset_prog_mode() will restore this mode.

curses.def_shell_mode()

Save the current terminal mode as the “shell” mode, the mode when the running program is not using curses. (Its counterpart is the “program” mode, when the program is using curses capabilities.) Subsequent calls to reset_shell_mode() will restore this mode.

curses.delay_output(ms)

Insert an ms millisecond pause in output.

curses.doupdate()

Update the physical screen. The curses library keeps two data structures, one representing the current physical screen contents and a virtual screen representing the desired next state. The doupdate() ground updates the physical screen to match the virtual screen.

The virtual screen may be updated by a noutrefresh() call after write operations such as addstr() have been performed on a window. The normal refresh() call is simply noutrefresh() followed by doupdate(); if you have to update multiple windows, you can speed performance and perhaps reduce screen flicker by issuing noutrefresh() calls on all windows, followed by a single doupdate().

curses.echo()

Enter echo mode. In echo mode, each character input is echoed to the screen as it is entered.

curses.endwin()

De-initialize the library, and return terminal to normal status.

curses.erasechar()

Return the user’s current erase character as a one-byte bytes object. Under Unix operating systems this is a property of the controlling tty of the curses program, and is not set by the curses library itself.

curses.filter()

The filter() routine, if used, must be called before initscr() is called. The effect is that, during those calls, LINES is set to 1; the capabilities clear, cup, cud, cud1, cuu1, cuu, vpa are disabled; and the home string is set to the value of cr. The effect is that the cursor is confined to the current line, and so are screen updates. This may be used for enabling character-at-a-time line editing without touching the rest of the screen.

curses.flash()

Flash the screen. That is, change it to reverse-video and then change it back in a short interval. Some people prefer such as ‘visible bell’ to the audible attention signal produced by beep().

curses.flushinp()

Flush all input buffers. This throws away any typeahead that has been typed by the user and has not yet been processed by the program.

curses.getmouse()

After getch() returns KEY_MOUSE to signal a mouse event, this method should be called to retrieve the queued mouse event, represented as a 5-tuple (id, x, y, z, bstate). id is an ID value used to distinguish multiple devices, and x, y, z are the event’s coordinates. (z is currently unused.) bstate is an integer value whose bits will be set to indicate the type of event, and will be the bitwise OR of one or more of the following constants, where n is the button number from 1 to 5: BUTTONn_PRESSED, BUTTONn_RELEASED, BUTTONn_CLICKED, BUTTONn_DOUBLE_CLICKED, BUTTONn_TRIPLE_CLICKED, BUTTON_SHIFT, BUTTON_CTRL, BUTTON_ALT.

Changed in version 3.10: The BUTTON5_* constants are now exposed if they are provided by the underlying curses library.

curses.getsyx()

Return the current coordinates of the virtual screen cursor as a tuple (y, x). If leaveok is currently True, then return (-1, -1).

curses.getwin(file)

Read window related data stored in the file by an earlier window.putwin() call. The routine then creates and initializes a new window using that data, returning the new window object.

curses.has_colors()

Return True if the terminal can display colors; otherwise, return False.

curses.has_extended_color_support()

Return True if the module supports extended colors; otherwise, return False. Extended color support allows more than 256 color pairs for terminals that support more than 16 colors (e.g. xterm-256color).

Extended color support requires ncurses version 6.1 or later.

New in version 3.10.

curses.has_ic()

Return True if the terminal has insert- and delete-character capabilities. This function is included for historical reasons only, as all modern software terminal emulators have such capabilities.

curses.has_il()

Return True if the terminal has insert- and delete-line capabilities, or can simulate them using scrolling regions. This function is included for historical reasons only, as all modern software terminal emulators have such capabilities.

curses.has_key(ch)

Take a key value ch, and return True if the current terminal type recognizes a key with that value.

curses.halfdelay(tenths)

Used for half-delay mode, which is similar to cbreak mode in that characters typed by the user are immediately available to the program. However, after blocking for tenths tenths of seconds, raise an exception if nothing has been typed. The value of tenths must be a number between 1 and 255. Use nocbreak() to leave half-delay mode.

curses.init_color(color_number, r, g, b)

Change the definition of a color, taking the number of the color to be changed followed by three RGB values (for the amounts of red, green, and blue components). The value of color_number must be between 0 and COLORS - 1. Each of r, g, b, must be a value between 0 and 1000. When init_color() is used, all occurrences of that color on the screen immediately change to the new definition. This function is a no-op on most terminals; it is active only if can_change_color() returns True.

curses.init_pair(pair_number, fg, bg)

Change the definition of a color-pair. It takes three arguments: the number of the color-pair to be changed, the foreground color number, and the background color number. The value of pair_number must be between 1 and COLOR_PAIRS - 1 (the 0 color pair is wired to white on black and cannot be changed). The value of fg and bg arguments must be between 0 and COLORS - 1, or, after calling use_default_colors(), -1. If the color-pair was previously initialized, the screen is refreshed and all occurrences of that color-pair are changed to the new definition.

curses.initscr()

Initialize the library. Return a window object which represents the whole screen.

Note

If there is an error opening the terminal, the underlying curses library may cause the interpreter to exit.

curses.is_term_resized(nlines, ncols)

Return True if resize_term() would modify the window structure, False otherwise.

curses.isendwin()

Return True if endwin() has been called (that is, the curses library has been deinitialized).

curses.keyname(k)

Return the name of the key numbered k as a bytes object. The name of a key generating printable ASCII character is the key’s character. The name of a control-key combination is a two-byte bytes object consisting of a caret (b'^') followed by the corresponding printable ASCII character. The name of an alt-key combination (128–255) is a bytes object consisting of the prefix b'M-' followed by the name of the corresponding ASCII character.

curses.killchar()

Return the user’s current line kill character as a one-byte bytes object. Under Unix operating systems this is a property of the controlling tty of the curses program, and is not set by the curses library itself.

curses.longname()

Return a bytes object containing the terminfo long name field describing the current terminal. The maximum length of a verbose description is 128 characters. It is defined only after the call to initscr().

curses.meta(flag)

If flag is True, allow 8-bit characters to be input. If flag is False, allow only 7-bit chars.

curses.mouseinterval(interval)

Set the maximum time in milliseconds that can elapse between press and release events in order for them to be recognized as a click, and return the previous interval value. The default value is 200 milliseconds, or one fifth of a second.

curses.mousemask(mousemask)

Set the mouse events to be reported, and return a tuple (availmask, oldmask). availmask indicates which of the specified mouse events can be reported; on complete failure it returns 0. oldmask is the previous value of the given window’s mouse event mask. If this function is never called, no mouse events are ever reported.

curses.napms(ms)

Sleep for ms milliseconds.

curses.newpad(nlines, ncols)

Create and return a pointer to a new pad data structure with the given number of lines and columns. Return a pad as a window object.

A pad is like a window, except that it is not restricted by the screen size, and is not necessarily associated with a particular part of the screen. Pads can be used when a large window is needed, and only a part of the window will be on the screen at one time. Automatic refreshes of pads (such as from scrolling or echoing of input) do not occur. The refresh() and noutrefresh() methods of a pad require 6 arguments to specify the part of the pad to be displayed and the location on the screen to be used for the display. The arguments are pminrow, pmincol, sminrow, smincol, smaxrow, smaxcol; the p arguments refer to the upper left corner of the pad region to be displayed and the s arguments define a clipping box on the screen within which the pad region is to be displayed.

curses.newwin(nlines, ncols)

curses.newwin(nlines, ncols, begin_y, begin_x)

Return a new window, whose left-upper corner is at (begin_y, begin_x), and whose height/width is nlines/ncols.

By default, the window will extend from the specified position to the lower right corner of the screen.

curses.nl()

Enter newline mode. This mode translates the return key into newline on input, and translates newline into return and line-feed on output. Newline mode is initially on.

curses.nocbreak()

Leave cbreak mode. Return to normal “cooked” mode with line buffering.

curses.noecho()

Leave echo mode. Echoing of input characters is turned off.

curses.nonl()

Leave newline mode. Disable translation of return into newline on input, and disable low-level translation of newline into newline/return on output (but this does not change the behavior of addch('\n'), which always does the equivalent of return and line feed on the virtual screen). With translation off, curses can sometimes speed up vertical motion a little; also, it will be able to detect the return key on input.

curses.noqiflush()

When the noqiflush() routine is used, normal flush of input and output queues associated with the INTR, QUIT and SUSP characters will not be done. You may want to call noqiflush() in a signal handler if you want output to continue as though the interrupt had not occurred, after the handler exits.

curses.noraw()

Leave raw mode. Return to normal “cooked” mode with line buffering.

curses.pair_content(pair_number)

Return a tuple (fg, bg) containing the colors for the requested color pair. The value of pair_number must be between 0 and COLOR_PAIRS - 1.

curses.pair_number(attr)

Return the number of the color-pair set by the attribute value attr. color_pair() is the counterpart to this function.

curses.putp(str)

Equivalent to tputs(str, 1, putchar); emit the value of a specified terminfo capability for the current terminal. Note that the output of putp() always goes to standard output.

curses.qiflush([flag])

If flag is False, the effect is the same as calling noqiflush(). If flag is True, or no argument is provided, the queues will be flushed when these control characters are read.

curses.raw()

Enter raw mode. In raw mode, normal line buffering and processing of interrupt, quit, suspend, and flow control keys are turned off; characters are presented to curses input functions one by one.

curses.reset_prog_mode()

Restore the terminal to “program” mode, as previously saved by def_prog_mode().

curses.reset_shell_mode()

Restore the terminal to “shell” mode, as previously saved by def_shell_mode().

curses.resetty()

Restore the state of the terminal modes to what it was at the last call to savetty().

curses.resize_term(nlines, ncols)

Backend function used by resizeterm(), performing most of the work; when resizing the windows, resize_term() blank-fills the areas that are extended. The calling application should fill in these areas with appropriate data. The resize_term() function attempts to resize all windows. However, due to the calling convention of pads, it is not possible to resize these without additional interaction with the application.

curses.resizeterm(nlines, ncols)

Resize the standard and current windows to the specified dimensions, and adjusts other bookkeeping data used by the curses library that record the window dimensions (in particular the SIGWINCH handler).

curses.savetty()

Save the current state of the terminal modes in a buffer, usable by resetty().

curses.get_escdelay()

Retrieves the value set by set_escdelay().

New in version 3.9.

curses.set_escdelay(ms)

Sets the number of milliseconds to wait after reading an escape character, to distinguish between an individual escape character entered on the keyboard from escape sequences sent by cursor and function keys.

New in version 3.9.

curses.get_tabsize()

Retrieves the value set by set_tabsize().

New in version 3.9.

curses.set_tabsize(size)

Sets the number of columns used by the curses library when converting a tab character to spaces as it adds the tab to a window.

New in version 3.9.

curses.setsyx(y, x)

Set the virtual screen cursor to y, x. If y and x are both -1, then leaveok is set True.

curses.setupterm(term=None, fd=- 1)

Initialize the terminal. term is a string giving the terminal name, or None; if omitted or None, the value of the TERM environment variable will be used. fd is the file descriptor to which any initialization sequences will be sent; if not supplied or -1, the file descriptor for sys.stdout will be used.

curses.start_color()

Must be called if the programmer wants to use colors, and before any other color manipulation routine is called. It is good practice to call this routine right after initscr().

start_color() initializes eight basic colors (black, red, green, yellow, blue, magenta, cyan, and white), and two global variables in the curses module, COLORS and COLOR_PAIRS, containing the maximum number of colors and color-pairs the terminal can support. It also restores the colors on the terminal to the values they had when the terminal was just turned on.

curses.termattrs()

Return a logical OR of all video attributes supported by the terminal. This information is useful when a curses program needs complete control over the appearance of the screen.

curses.termname()

Return the value of the environment variable TERM, as a bytes object, truncated to 14 characters.

curses.tigetflag(capname)

Return the value of the Boolean capability corresponding to the terminfo capability name capname as an integer. Return the value -1 if capname is not a Boolean capability, or 0 if it is canceled or absent from the terminal description.

curses.tigetnum(capname)

Return the value of the numeric capability corresponding to the terminfo capability name capname as an integer. Return the value -2 if capname is not a numeric capability, or -1 if it is canceled or absent from the terminal description.

curses.tigetstr(capname)

Return the value of the string capability corresponding to the terminfo capability name capname as a bytes object. Return None if capname is not a terminfo “string capability”, or is canceled or absent from the terminal description.

curses.tparm(str[, ...])

Instantiate the bytes object str with the supplied parameters, where str should be a parameterized string obtained from the terminfo database. E.g. tparm(tigetstr("cup"), 5, 3) could result in b'\033[6;4H', the exact result depending on terminal type.

curses.typeahead(fd)

Specify that the file descriptor fd be used for typeahead checking. If fd is -1, then no typeahead checking is done.

The curses library does “line-breakout optimization” by looking for typeahead periodically while updating the screen. If input is found, and it is coming from a tty, the current update is postponed until refresh or doupdate is called again, allowing faster response to commands typed in advance. This function allows specifying a different file descriptor for typeahead checking.

curses.unctrl(ch)

Return a bytes object which is a printable representation of the character ch. Control characters are represented as a caret followed by the character, for example as b'^C'. Printing characters are left as they are.

curses.ungetch(ch)

Push ch so the next getch() will return it.

Note

Only one ch can be pushed before getch() is called.

curses.update_lines_cols()

Update the LINES and COLS module variables. Useful for detecting manual screen resize.

New in version 3.5.

curses.unget_wch(ch)

Push ch so the next get_wch() will return it.

Note

Only one ch can be pushed before get_wch() is called.

New in version 3.3.

curses.ungetmouse(id, x, y, z, bstate)

Push a KEY_MOUSE event onto the input queue, associating the given state data with it.

curses.use_env(flag)

If used, this function should be called before initscr() or newterm are called. When flag is False, the values of lines and columns specified in the terminfo database will be used, even if environment variables LINES and COLUMNS (used by default) are set, or if curses is running in a window (in which case default behavior would be to use the window size if LINES and COLUMNS are not set).

curses.use_default_colors()

Allow use of default values for colors on terminals supporting this feature. Use this to support transparency in your application. The default color is assigned to the color number -1. After calling this function, init_pair(x, curses.COLOR_RED, -1) initializes, for instance, color pair x to a red foreground color on the default background.

curses.wrapper(func, /, *args, **kwargs)

Initialize curses and call another callable object, func, which should be the rest of your curses-using application. If the application raises an exception, this function will restore the terminal to a sane state before re-raising the exception and generating a traceback. The callable object func is then passed the main window ‘stdscr’ as its first argument, followed by any other arguments passed to wrapper(). Before calling func, wrapper() turns on cbreak mode, turns off echo, enables the terminal keypad, and initializes colors if the terminal has color support. On exit (whether normally or by exception) it restores cooked mode, turns on echo, and disables the terminal keypad.

Window Objects

Window objects, as returned by initscr() and newwin() above, have the following methods and attributes:

window.addch(ch[, attr])

window.addch(y, x, ch[, attr])

Paint character ch at (y, x) with attributes attr, overwriting any character previously painted at that location. By default, the character position and attributes are the current settings for the window object.

Note

Writing outside the window, subwindow, or pad raises a curses.error. Attempting to write to the lower right corner of a window, subwindow, or pad will cause an exception to be raised after the character is printed.

window.addnstr(str, n[, attr])

window.addnstr(y, x, str, n[, attr])

Paint at most n characters of the character string str at (y, x) with attributes attr, overwriting anything previously on the display.

window.addstr(str[, attr])

window.addstr(y, x, str[, attr])

Paint the character string str at (y, x) with attributes attr, overwriting anything previously on the display.

Note

• Writing outside the window, subwindow, or pad raises curses.error. Attempting to write to the lower right corner of a window, subwindow, or pad will cause an exception to be raised after the string is printed.

• A bug in ncurses, the backend for this Python module, can cause SegFaults when resizing windows. This is fixed in ncurses-6.1-20190511. If you are stuck with an earlier ncurses, you can avoid triggering this if you do not call addstr() with a str that has embedded newlines. Instead, call addstr() separately for each line.

window.attroff(attr)

Remove attribute attr from the “background” set applied to all writes to the current window.

window.attron(attr)

Add attribute attr from the “background” set applied to all writes to the current window.

window.attrset(attr)

Set the “background” set of attributes to attr. This set is initially 0 (no attributes).

window.bkgd(ch[, attr])

Set the background property of the window to the character ch, with attributes attr. The change is then applied to every character position in that window:

• The attribute of every character in the window is changed to the new background attribute.

• Wherever the former background character appears, it is changed to the new background character.

window.bkgdset(ch[, attr])

Set the window’s background. A window’s background consists of a character and any combination of attributes. The attribute part of the background is combined (OR’ed) with all non-blank characters that are written into the window. Both the character and attribute parts of the background are combined with the blank characters. The background becomes a property of the character and moves with the character through any scrolling and insert/delete line/character operations.

window.border([ls[, rs[, ts[, bs[, tl[, tr[, bl[, br]]]]]]]])

Draw a border around the edges of the window. Each parameter specifies the character to use for a specific part of the border; see the table below for more details.

Note

A 0 value for any parameter will cause the default character to be used for that parameter. Keyword parameters can not be used. The defaults are listed in this table:

Parameter	Description	Default value
ls	Left side	ACS_VLINE
rs	Right side	ACS_VLINE
ts	Top	ACS_HLINE
bs	Bottom	ACS_HLINE
tl	Upper-left corner	ACS_ULCORNER
tr	Upper-right corner	ACS_URCORNER
bl	Bottom-left corner	ACS_LLCORNER
br	Bottom-right corner	ACS_LRCORNER

window.box([vertch, horch])

Similar to border(), but both ls and rs are vertch and both ts and bs are horch. The default corner characters are always used by this function.

window.chgat(attr)

window.chgat(num, attr)

window.chgat(y, x, attr)

window.chgat(y, x, num, attr)

Set the attributes of num characters at the current cursor position, or at position (y, x) if supplied. If num is not given or is -1, the attribute will be set on all the characters to the end of the line. This function moves cursor to position (y, x) if supplied. The changed line will be touched using the touchline() method so that the contents will be redisplayed by the next window refresh.

window.clear()

Like erase(), but also cause the whole window to be repainted upon next call to refresh().

window.clearok(flag)

If flag is True, the next call to refresh() will clear the window completely.

window.clrtobot()

Erase from cursor to the end of the window: all lines below the cursor are deleted, and then the equivalent of clrtoeol() is performed.

window.clrtoeol()

Erase from cursor to the end of the line.

window.cursyncup()

Update the current cursor position of all the ancestors of the window to reflect the current cursor position of the window.

window.delch([y, x])

Delete any character at (y, x).

window.deleteln()

Delete the line under the cursor. All following lines are moved up by one line.

window.derwin(begin_y, begin_x)

window.derwin(nlines, ncols, begin_y, begin_x)

An abbreviation for “derive window”, derwin() is the same as calling subwin(), except that begin_y and begin_x are relative to the origin of the window, rather than relative to the entire screen. Return a window object for the derived window.

window.echochar(ch[, attr])

Add character ch with attribute attr, and immediately call refresh() on the window.

window.enclose(y, x)

Test whether the given pair of screen-relative character-cell coordinates are enclosed by the given window, returning True or False. It is useful for determining what subset of the screen windows enclose the location of a mouse event.

Changed in version 3.10: Previously it returned 1 or 0 instead of True or False.

window.encoding

Encoding used to encode method arguments (Unicode strings and characters). The encoding attribute is inherited from the parent window when a subwindow is created, for example with window.subwin(). By default, current locale encoding is used (see locale.getencoding()).

New in version 3.3.

window.erase()

Clear the window.

window.getbegyx()

Return a tuple (y, x) of co-ordinates of upper-left corner.

window.getbkgd()

Return the given window’s current background character/attribute pair.

window.getch([y, x])

Get a character. Note that the integer returned does not have to be in ASCII range: function keys, keypad keys and so on are represented by numbers higher than 255. In no-delay mode, return -1 if there is no input, otherwise wait until a key is pressed.

window.get_wch([y, x])

Get a wide character. Return a character for most keys, or an integer for function keys, keypad keys, and other special keys. In no-delay mode, raise an exception if there is no input.

New in version 3.3.

window.getkey([y, x])

Get a character, returning a string instead of an integer, as getch() does. Function keys, keypad keys and other special keys return a multibyte string containing the key name. In no-delay mode, raise an exception if there is no input.

window.getmaxyx()

Return a tuple (y, x) of the height and width of the window.

window.getparyx()

Return the beginning coordinates of this window relative to its parent window as a tuple (y, x). Return (-1, -1) if this window has no parent.

window.getstr()

window.getstr(n)

window.getstr(y, x)

window.getstr(y, x, n)

Read a bytes object from the user, with primitive line editing capacity.

window.getyx()

Return a tuple (y, x) of current cursor position relative to the window’s upper-left corner.

window.hline(ch, n)

window.hline(y, x, ch, n)

Display a horizontal line starting at (y, x) with length n consisting of the character ch.

window.idcok(flag)

If flag is False, curses no longer considers using the hardware insert/delete character feature of the terminal; if flag is True, use of character insertion and deletion is enabled. When curses is first initialized, use of character insert/delete is enabled by default.

window.idlok(flag)

If flag is True, curses will try and use hardware line editing facilities. Otherwise, line insertion/deletion are disabled.

window.immedok(flag)

If flag is True, any change in the window image automatically causes the window to be refreshed; you no longer have to call refresh() yourself. However, it may degrade performance considerably, due to repeated calls to wrefresh. This option is disabled by default.

window.inch([y, x])

Return the character at the given position in the window. The bottom 8 bits are the character proper, and upper bits are the attributes.

window.insch(ch[, attr])

window.insch(y, x, ch[, attr])

Paint character ch at (y, x) with attributes attr, moving the line from position x right by one character.

window.insdelln(nlines)

Insert nlines lines into the specified window above the current line. The nlines bottom lines are lost. For negative nlines, delete nlines lines starting with the one under the cursor, and move the remaining lines up. The bottom nlines lines are cleared. The current cursor position remains the same.

window.insertln()

Insert a blank line under the cursor. All following lines are moved down by one line.

window.insnstr(str, n[, attr])

window.insnstr(y, x, str, n[, attr])

Insert a character string (as many characters as will fit on the line) before the character under the cursor, up to n characters. If n is zero or negative, the entire string is inserted. All characters to the right of the cursor are shifted right, with the rightmost characters on the line being lost. The cursor position does not change (after moving to y, x, if specified).

window.insstr(str[, attr])

window.insstr(y, x, str[, attr])

Insert a character string (as many characters as will fit on the line) before the character under the cursor. All characters to the right of the cursor are shifted right, with the rightmost characters on the line being lost. The cursor position does not change (after moving to y, x, if specified).

window.instr([n])

window.instr(y, x[, n])

Return a bytes object of characters, extracted from the window starting at the current cursor position, or at y, x if specified. Attributes are stripped from the characters. If n is specified, instr() returns a string at most n characters long (exclusive of the trailing NUL).

window.is_linetouched(line)

Return True if the specified line was modified since the last call to refresh(); otherwise return False. Raise a curses.error exception if line is not valid for the given window.

window.is_wintouched()

Return True if the specified window was modified since the last call to refresh(); otherwise return False.

window.keypad(flag)

If flag is True, escape sequences generated by some keys (keypad, function keys) will be interpreted by curses. If flag is False, escape sequences will be left as is in the input stream.

window.leaveok(flag)

If flag is True, cursor is left where it is on update, instead of being at “cursor position.” This reduces cursor movement where possible. If possible the cursor will be made invisible.

If flag is False, cursor will always be at “cursor position” after an update.

window.move(new_y, new_x)

Move cursor to (new_y, new_x).

window.mvderwin(y, x)

Move the window inside its parent window. The screen-relative parameters of the window are not changed. This routine is used to display different parts of the parent window at the same physical position on the screen.

window.mvwin(new_y, new_x)

Move the window so its upper-left corner is at (new_y, new_x).

window.nodelay(flag)

If flag is True, getch() will be non-blocking.

window.notimeout(flag)

If flag is True, escape sequences will not be timed out.

If flag is False, after a few milliseconds, an escape sequence will not be interpreted, and will be left in the input stream as is.

window.noutrefresh()

Mark for refresh but wait. This function updates the data structure representing the desired state of the window, but does not force an update of the physical screen. To accomplish that, call doupdate().

window.overlay(destwin[, sminrow, smincol, dminrow, dmincol, dmaxrow, dmaxcol])

Overlay the window on top of destwin. The windows need not be the same size, only the overlapping region is copied. This copy is non-destructive, which means that the current background character does not overwrite the old contents of destwin.

To get fine-grained control over the copied region, the second form of overlay() can be used. sminrow and smincol are the upper-left coordinates of the source window, and the other variables mark a rectangle in the destination window.

window.overwrite(destwin[, sminrow, smincol, dminrow, dmincol, dmaxrow, dmaxcol])

Overwrite the window on top of destwin. The windows need not be the same size, in which case only the overlapping region is copied. This copy is destructive, which means that the current background character overwrites the old contents of destwin.

To get fine-grained control over the copied region, the second form of overwrite() can be used. sminrow and smincol are the upper-left coordinates of the source window, the other variables mark a rectangle in the destination window.

window.putwin(file)

Write all data associated with the window into the provided file object. This information can be later retrieved using the getwin() function.

window.redrawln(beg, num)

Indicate that the num screen lines, starting at line beg, are corrupted and should be completely redrawn on the next refresh() call.

window.redrawwin()

Touch the entire window, causing it to be completely redrawn on the next refresh() call.

window.refresh([pminrow, pmincol, sminrow, smincol, smaxrow, smaxcol])

Update the display immediately (sync actual screen with previous drawing/deleting methods).

The 6 optional arguments can only be specified when the window is a pad created with newpad(). The additional parameters are needed to indicate what part of the pad and screen are involved. pminrow and pmincol specify the upper left-hand corner of the rectangle to be displayed in the pad. sminrow, smincol, smaxrow, and smaxcol specify the edges of the rectangle to be displayed on the screen. The lower right-hand corner of the rectangle to be displayed in the pad is calculated from the screen coordinates, since the rectangles must be the same size. Both rectangles must be entirely contained within their respective structures. Negative values of pminrow, pmincol, sminrow, or smincol are treated as if they were zero.

window.resize(nlines, ncols)

Reallocate storage for a curses window to adjust its dimensions to the specified values. If either dimension is larger than the current values, the window’s data is filled with blanks that have the current background rendition (as set by bkgdset()) merged into them.

window.scroll([lines=1])

Scroll the screen or scrolling region upward by lines lines.

window.scrollok(flag)

Control what happens when the cursor of a window is moved off the edge of the window or scrolling region, either as a result of a newline action on the bottom line, or typing the last character of the last line. If flag is False, the cursor is left on the bottom line. If flag is True, the window is scrolled up one line. Note that in order to get the physical scrolling effect on the terminal, it is also necessary to call idlok().

window.setscrreg(top, bottom)

Set the scrolling region from line top to line bottom. All scrolling actions will take place in this region.

window.standend()

Turn off the standout attribute. On some terminals this has the side effect of turning off all attributes.

window.standout()

Turn on attribute A_STANDOUT.

window.subpad(begin_y, begin_x)

window.subpad(nlines, ncols, begin_y, begin_x)

Return a sub-window, whose upper-left corner is at (begin_y, begin_x), and whose width/height is ncols/nlines.

window.subwin(begin_y, begin_x)

window.subwin(nlines, ncols, begin_y, begin_x)

Return a sub-window, whose upper-left corner is at (begin_y, begin_x), and whose width/height is ncols/nlines.

By default, the sub-window will extend from the specified position to the lower right corner of the window.

window.syncdown()

Touch each location in the window that has been touched in any of its ancestor windows. This routine is called by refresh(), so it should almost never be necessary to call it manually.

window.syncok(flag)

If flag is True, then syncup() is called automatically whenever there is a change in the window.

window.syncup()

Touch all locations in ancestors of the window that have been changed in the window.

window.timeout(delay)

Set blocking or non-blocking read behavior for the window. If delay is negative, blocking read is used (which will wait indefinitely for input). If delay is zero, then non-blocking read is used, and getch() will return -1 if no input is waiting. If delay is positive, then getch() will block for delay milliseconds, and return -1 if there is still no input at the end of that time.

window.touchline(start, count[, changed])

Pretend count lines have been changed, starting with line start. If changed is supplied, it specifies whether the affected lines are marked as having been changed (changed=True) or unchanged (changed=False).

window.touchwin()

Pretend the whole window has been changed, for purposes of drawing optimizations.

window.untouchwin()

Mark all lines in the window as unchanged since the last call to refresh().

window.vline(ch, n[, attr])

window.vline(y, x, ch, n[, attr])

Display a vertical line starting at (y, x) with length n consisting of the character ch with attributes attr.

Constants

The curses module defines the following data members:

curses.ERR

Some curses routines that return an integer, such as getch(), return ERR upon failure.

curses.OK

Some curses routines that return an integer, such as napms(), return OK upon success.

curses.version

curses.__version__

A bytes object representing the current version of the module.

curses.ncurses_version

A named tuple containing the three components of the ncurses library version: major, minor, and patch. All values are integers. The components can also be accessed by name, so curses.ncurses_version[0] is equivalent to curses.ncurses_version.major and so on.

Availability: if the ncurses library is used.

New in version 3.8.

curses.COLORS

The maximum number of colors the terminal can support. It is defined only after the call to start_color().

curses.COLOR_PAIRS

The maximum number of color pairs the terminal can support. It is defined only after the call to start_color().

curses.COLS

The width of the screen, i.e., the number of columns. It is defined only after the call to initscr(). Updated by update_lines_cols(), resizeterm() and resize_term().

curses.LINES

The height of the screen, i.e., the number of lines. It is defined only after the call to initscr(). Updated by update_lines_cols(), resizeterm() and resize_term().

Some constants are available to specify character cell attributes. The exact constants available are system dependent.

Attribute	Meaning
curses.A_ALTCHARSET	Alternate character set mode
curses.A_BLINK	Blink mode
curses.A_BOLD	Bold mode
curses.A_DIM	Dim mode
curses.A_INVIS	Invisible or blank mode
curses.A_ITALIC	Italic mode
curses.A_NORMAL	Normal attribute
curses.A_PROTECT	Protected mode
curses.A_REVERSE	Reverse background and foreground colors
curses.A_STANDOUT	Standout mode
curses.A_UNDERLINE	Underline mode
curses.A_HORIZONTAL	Horizontal highlight
curses.A_LEFT	Left highlight
curses.A_LOW	Low highlight
curses.A_RIGHT	Right highlight
curses.A_TOP	Top highlight
curses.A_VERTICAL	Vertical highlight

New in version 3.7: A_ITALIC was added.

Several constants are available to extract corresponding attributes returned by some methods.

Bit-mask	Meaning
curses.A_ATTRIBUTES	Bit-mask to extract attributes
curses.A_CHARTEXT	Bit-mask to extract a character
curses.A_COLOR	Bit-mask to extract color-pair field information

Keys are referred to by integer constants with names starting with KEY_. The exact keycaps available are system dependent.

Key constant	Key
curses.KEY_MIN	Minimum key value
curses.KEY_BREAK	Break key (unreliable)
curses.KEY_DOWN	Down-arrow
curses.KEY_UP	Up-arrow
curses.KEY_LEFT	Left-arrow
curses.KEY_RIGHT	Right-arrow
curses.KEY_HOME	Home key (upward+left arrow)
curses.KEY_BACKSPACE	Backspace (unreliable)
curses.KEY_F0	Function keys. Up to 64 function keys are supported.
curses.KEY_Fn	Value of function key n
curses.KEY_DL	Delete line
curses.KEY_IL	Insert line
curses.KEY_DC	Delete character
curses.KEY_IC	Insert char or enter insert mode
curses.KEY_EIC	Exit insert char mode
curses.KEY_CLEAR	Clear screen
curses.KEY_EOS	Clear to end of screen
curses.KEY_EOL	Clear to end of line
curses.KEY_SF	Scroll 1 line forward
curses.KEY_SR	Scroll 1 line backward (reverse)
curses.KEY_NPAGE	Next page
curses.KEY_PPAGE	Previous page
curses.KEY_STAB	Set tab
curses.KEY_CTAB	Clear tab
curses.KEY_CATAB	Clear all tabs
curses.KEY_ENTER	Enter or send (unreliable)
curses.KEY_SRESET	Soft (partial) reset (unreliable)
curses.KEY_RESET	Reset or hard reset (unreliable)
curses.KEY_PRINT	Print
curses.KEY_LL	Home down or bottom (lower left)
curses.KEY_A1	Upper left of keypad
curses.KEY_A3	Upper right of keypad
curses.KEY_B2	Center of keypad
curses.KEY_C1	Lower left of keypad
curses.KEY_C3	Lower right of keypad
curses.KEY_BTAB	Back tab
curses.KEY_BEG	Beg (beginning)
curses.KEY_CANCEL	Cancel
curses.KEY_CLOSE	Close
curses.KEY_COMMAND	Cmd (command)
curses.KEY_COPY	Copy
curses.KEY_CREATE	Create
curses.KEY_END	End
curses.KEY_EXIT	Exit
curses.KEY_FIND	Find
curses.KEY_HELP	Help
curses.KEY_MARK	Mark
curses.KEY_MESSAGE	Message
curses.KEY_MOVE	Move
curses.KEY_NEXT	Next
curses.KEY_OPEN	Open
curses.KEY_OPTIONS	Options
curses.KEY_PREVIOUS	Prev (previous)
curses.KEY_REDO	Redo
curses.KEY_REFERENCE	Ref (reference)
curses.KEY_REFRESH	Refresh
curses.KEY_REPLACE	Replace
curses.KEY_RESTART	Restart
curses.KEY_RESUME	Resume
curses.KEY_SAVE	Save
curses.KEY_SBEG	Shifted Beg (beginning)
curses.KEY_SCANCEL	Shifted Cancel
curses.KEY_SCOMMAND	Shifted Command
curses.KEY_SCOPY	Shifted Copy
curses.KEY_SCREATE	Shifted Create
curses.KEY_SDC	Shifted Delete char
curses.KEY_SDL	Shifted Delete line
curses.KEY_SELECT	Select
curses.KEY_SEND	Shifted End
curses.KEY_SEOL	Shifted Clear line
curses.KEY_SEXIT	Shifted Exit
curses.KEY_SFIND	Shifted Find
curses.KEY_SHELP	Shifted Help
curses.KEY_SHOME	Shifted Home
curses.KEY_SIC	Shifted Input
curses.KEY_SLEFT	Shifted Left arrow
curses.KEY_SMESSAGE	Shifted Message
curses.KEY_SMOVE	Shifted Move
curses.KEY_SNEXT	Shifted Next
curses.KEY_SOPTIONS	Shifted Options
curses.KEY_SPREVIOUS	Shifted Prev
curses.KEY_SPRINT	Shifted Print
curses.KEY_SREDO	Shifted Redo
curses.KEY_SREPLACE	Shifted Replace
curses.KEY_SRIGHT	Shifted Right arrow
curses.KEY_SRSUME	Shifted Resume
curses.KEY_SSAVE	Shifted Save
curses.KEY_SSUSPEND	Shifted Suspend
curses.KEY_SUNDO	Shifted Undo
curses.KEY_SUSPEND	Suspend
curses.KEY_UNDO	Undo
curses.KEY_MOUSE	Mouse event has occurred
curses.KEY_RESIZE	Terminal resize event
curses.KEY_MAX	Maximum key value

On VT100s and their software emulations, such as X terminal emulators, there are normally at least four function keys (KEY_F1, KEY_F2, KEY_F3, KEY_F4) available, and the arrow keys mapped to KEY_UP, KEY_DOWN, KEY_LEFT and KEY_RIGHT in the obvious way. If your machine has a PC keyboard, it is safe to expect arrow keys and twelve function keys (older PC keyboards may have only ten function keys); also, the following keypad mappings are standard:

Keycap	Constant
Insert	KEY_IC
Delete	KEY_DC
Home	KEY_HOME
End	KEY_END
Page Up	KEY_PPAGE
Page Down	KEY_NPAGE

The following table lists characters from the alternate character set. These are inherited from the VT100 terminal, and will generally be available on software emulations such as X terminals. When there is no graphic available, curses falls back on a crude printable ASCII approximation.

Note

These are available only after initscr() has been called.

ACS code	Meaning
curses.ACS_BBSS	alternate name for upper right corner
curses.ACS_BLOCK	solid square block
curses.ACS_BOARD	board of squares
curses.ACS_BSBS	alternate name for horizontal line
curses.ACS_BSSB	alternate name for upper left corner
curses.ACS_BSSS	alternate name for top tee
curses.ACS_BTEE	bottom tee
curses.ACS_BULLET	bullet
curses.ACS_CKBOARD	checker board (stipple)
curses.ACS_DARROW	arrow pointing down
curses.ACS_DEGREE	degree symbol
curses.ACS_DIAMOND	diamond
curses.ACS_GEQUAL	greater-than-or-equal-to
curses.ACS_HLINE	horizontal line
curses.ACS_LANTERN	lantern symbol
curses.ACS_LARROW	left arrow
curses.ACS_LEQUAL	less-than-or-equal-to
curses.ACS_LLCORNER	lower left-hand corner
curses.ACS_LRCORNER	lower right-hand corner
curses.ACS_LTEE	left tee
curses.ACS_NEQUAL	not-equal sign
curses.ACS_PI	letter pi
curses.ACS_PLMINUS	plus-or-minus sign
curses.ACS_PLUS	big plus sign
curses.ACS_RARROW	right arrow
curses.ACS_RTEE	right tee
curses.ACS_S1	scan line 1
curses.ACS_S3	scan line 3
curses.ACS_S7	scan line 7
curses.ACS_S9	scan line 9
curses.ACS_SBBS	alternate name for lower right corner
curses.ACS_SBSB	alternate name for vertical line
curses.ACS_SBSS	alternate name for right tee
curses.ACS_SSBB	alternate name for lower left corner
curses.ACS_SSBS	alternate name for bottom tee
curses.ACS_SSSB	alternate name for left tee
curses.ACS_SSSS	alternate name for crossover or big plus
curses.ACS_STERLING	pound sterling
curses.ACS_TTEE	top tee
curses.ACS_UARROW	up arrow
curses.ACS_ULCORNER	upper left corner
curses.ACS_URCORNER	upper right corner
curses.ACS_VLINE	vertical line

The following table lists mouse button constants used by getmouse():

Mouse button constant	Meaning
curses.BUTTONn_PRESSED	Mouse button n pressed
curses.BUTTONn_RELEASED	Mouse button n released
curses.BUTTONn_CLICKED	Mouse button n clicked
curses.BUTTONn_DOUBLE_CLICKED	Mouse button n double clicked
curses.BUTTONn_TRIPLE_CLICKED	Mouse button n triple clicked
curses.BUTTON_SHIFT	Shift was down during button state change
curses.BUTTON_CTRL	Control was down during button state change
curses.BUTTON_ALT	Control was down during button state change

Changed in version 3.10: The BUTTON5_* constants are now exposed if they are provided by the underlying curses library.

The following table lists the predefined colors:

Constant	Color
curses.COLOR_BLACK	Black
curses.COLOR_BLUE	Blue
curses.COLOR_CYAN	Cyan (light greenish blue)
curses.COLOR_GREEN	Green
curses.COLOR_MAGENTA	Magenta (purplish red)
curses.COLOR_RED	Red
curses.COLOR_WHITE	White
curses.COLOR_YELLOW	Yellow

curses.textpad — Text input widget for curses programs

The curses.textpad module provides a Textbox class that handles elementary text editing in a curses window, supporting a set of keybindings resembling those of Emacs (thus, also of Netscape Navigator, BBedit 6.x, FrameMaker, and many other programs). The module also provides a rectangle-drawing function useful for framing text boxes or for other purposes.

The module curses.textpad defines the following function:

curses.textpad.rectangle(win, uly, ulx, lry, lrx)

Draw a rectangle. The first argument must be a window object; the remaining arguments are coordinates relative to that window. The second and third arguments are the y and x coordinates of the upper left hand corner of the rectangle to be drawn; the fourth and fifth arguments are the y and x coordinates of the lower right hand corner. The rectangle will be drawn using VT100/IBM PC forms characters on terminals that make this possible (including xterm and most other software terminal emulators). Otherwise it will be drawn with ASCII dashes, vertical bars, and plus signs.

Textbox objects

You can instantiate a Textbox object as follows:

class curses.textpad.Textbox(win)

Return a textbox widget object. The win argument should be a curses window object in which the textbox is to be contained. The edit cursor of the textbox is initially located at the upper left hand corner of the containing window, with coordinates (0, 0). The instance’s stripspaces flag is initially on.

Textbox objects have the following methods:

edit([validator])

This is the entry point you will normally use. It accepts editing keystrokes until one of the termination keystrokes is entered. If validator is supplied, it must be a function. It will be called for each keystroke entered with the keystroke as a parameter; command dispatch is done on the result. This method returns the window contents as a string; whether blanks in the window are included is affected by the stripspaces attribute.

do_command(ch)

Process a single command keystroke. Here are the supported special keystrokes:

Keystroke	Action
Control-A	Go to left edge of window.
Control-B	Cursor left, wrapping to previous line if appropriate.
Control-D	Delete character under cursor.
Control-E	Go to right edge (stripspaces off) or end of line (stripspaces on).
Control-F	Cursor right, wrapping to next line when appropriate.
Control-G	Terminate, returning the window contents.
Control-H	Delete character backward.
Control-J	Terminate if the window is 1 line, otherwise insert newline.
Control-K	If line is blank, delete it, otherwise clear to end of line.
Control-L	Refresh screen.
Control-N	Cursor down; move down one line.
Control-O	Insert a blank line at cursor location.
Control-P	Cursor up; move up one line.

Move operations do nothing if the cursor is at an edge where the movement is not possible. The following synonyms are supported where possible:

Constant	Keystroke
KEY_LEFT	Control-B
KEY_RIGHT	Control-F
KEY_UP	Control-P
KEY_DOWN	Control-N
KEY_BACKSPACE	Control-h

All other keystrokes are treated as a command to insert the given character and move right (with line wrapping).

gather()

Return the window contents as a string; whether blanks in the window are included is affected by the stripspaces member.

stripspaces

This attribute is a flag which controls the interpretation of blanks in the window. When it is on, trailing blanks on each line are ignored; any cursor motion that would land the cursor on a trailing blank goes to the end of that line instead, and trailing blanks are stripped when the window contents are gathered.